Water Heat Exchanger Coaxial Tube in Tube Heat Exchanger for Hydro Cooler

Product Description

 Stainless Steel Tubing Coil Heat Exchanger

Model	ECOS-20122902
Condenser Tube Material	copper
Shell Material	Stainless Steel SS304
Input Power	3.75 KW
Rated Cooling Power	11.5 KW
Rated Heating Power	14 KW
Cooling Area	0.8 m2
Condenser Tube Outer Diameter	17.8 mm
Condenser Tube  Inner Diameter	19 mm
Condenser Tube Maximum Pressure	5.5 Mpa / 4.5Mpa
Outlook/Size	Customized
Weight	4.45 Kg

Coaxial Heat Exchanger

Coaxial heat exchanger consist of one spiral grooves inner tube and a outer tube. Cold liquid and heat liquid flow in the gap that between inner and outer tube or in inner tube separately.

Structure Feature

High efficiency
Spiral groove structure can enhance heat transfer on both sides. The axial flow and spiral rotation flow of the fluid in the tube will intensify the mixing of the fluid near the tube wall, thus enhancing the turbulence intensity and increasing the heat transfer coefficient

Self-cleaning ability
The coaxial heat exchanger has self-cleaning ability because the fluid spiral flow washes the surface. Coaxial heat exchanger has stable performance and low attenuation. The cross-section area of the waterway is large, allowing sediment and large diameter fibers to pass through without blocking. The water passage is clean because the inner tube of the spiral groove keeps the flow turbulent and cleans the surface

Effective prevention of freezing
Water is not easy to freeze because it is turbulent when it flows at a low speed in a spiral groove. The special spiral groove structure of the inner tube makes the inner tube flexible to a certain extent and does not produce the risk of frost cracking.

Less risk of leakage
Heat exchangers are very worried about leakage due to long-term vibration, pressure fluctuation, alternation of heat and cold, and so on. The risk of leakage of coaxial exchangers is seldom due to fewer welding points, simple processing and easy control of welding quality

Adapt to all kinds working conditions
In the actual operation of refrigeration system, the internal pressure is often in an alternate state due to temperature fluctuation, start-stop cycle, heat pump defrosting, expansion valve regulation and other factors. Spiral coaxial heat exchanger is more resistant to pressure shock and pressure shock than plate heat exchanger under constant vibration and pressure change, and can adapt to the complexity of actual working conditions

Kinds of coaxial heat exchanger that APT design and produce

1 Based on shape
Circle ,Rectangle,Double helix,Spiral,Trombone

2 Based on system No.
Single system,Double helix type 3 systems,Trombone interspersed 2 systems,Trombone type 6 systems,Spiral type 9 systems

3 Based on material
Red copper,Cupronickel (BFe-10-1-1),Titanium,Stainless steel,Steel

Inner tube material
Inner tube material can be: red copper, cupronickel(BFe-10-1-1), Titanium, Stainless steel. And inner tube can be choosed by smooth tube or enhanced surface tube. And there are also double-wall copper inner tube.

Outer tube material
Depending different working condition, outer tube material can be: steel, red copper, cupro-nickel, titanium, stainless steel etc.





ECOICE coaxial heat exchangers with excellent ability for heat exchanging and adaptation are widely used for:

1. Heat pump water heater condenser
2. Condenser/evaporator for water chiller
3. Condenser for pool heat pump
4. Condenser/evaporator for water(ground) source heat pump
5. Cooler or regenerator for CO2 heat pump air
6. Condenser/evaporator for marine AC
7. Condenser for ice machine
8. Evaporator for water purifier
9. Evaporation or condenser for mariculture constant temperature machine
10. Condenser for dish washer



Any inquiry or question, feel free to contact us